A handy tool for creating identical tube sections in a flash
By Helen I. Driggs
(Originally Published by MJSA October 2024)
A tube-cutting jig is a great tool, but the width of the sawing slot on most models can slightly throw off measurements when fabricating hinge knuckles or riser tubes for cold connections. Often the sawn end is not perfectly perpendicular either. This handy jig helps you create a series of accurately filed and identically measured tube sections all at once, instead of filing them individually in a miter jig. While you can solder or weld your jig together, I prefer to use Superglue on a job-by-job basis.
1. To make your own jig, you’ll need two steel rod sections with diameters matching the height of the tube sections you plan to cut, a scrap of sheet metal, a sharp scribe, an L-square or ruler, and Superglue.
2. Scribe a sharp line on the sheet metal and apply glue along the scribed line.
3. Working quickly, align one rod along the scribed line before the glue sets. I used clothespins to hold the rod and sheet together firmly, allowing the glue to set for several hours.
4. Using the tubing you intend to cut, press it firmly against the glued rod and scribe a second line parallel to the first at the widest part of the tube.
5. Verify the spacing is accurate with the L-square. I taped the metal sheet to a bench block for stability. Then, glue the second rod along the second scribed line and allow the glue to set for several hours.
6. Cut the desired number of tubing sections using a tube-cutting jig, plus one extra section. Glue the extra section at the end of the channel between the rods to serve as a “stop” for the other tube sections.
7. To use the jig, align all the tubing sections within the channel and against the stop. Gently file the sections as a group. The steel rods ensure that the file rides evenly over the tube ends, filing them to the same height with flat, even tops—essential rivet risers, hinge knuckles, or decorative elements.
8. Voilá! Five identical tube sections in a flash.
Manage Consent
To provide the best experiences, we use technologies like cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behavior or unique IDs on this site. Not consenting or withdrawing consent, may adversely affect certain features and functions.
Functional
Always active
The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.
Preferences
The technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
The technical storage or access that is used exclusively for statistical purposes.The technical storage or access that is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance on the part of your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone cannot usually be used to identify you.
Marketing
The technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.
A Fresh Look. A New Website. A Stronger Membership.
We’re excited to unveil Jewelers of America’s refreshed brand and redesigned website, reflecting our growing community and continued commitment to the jewelry industry.
With JA and MJSA now united under one membership, we’re bringing together more resources, expertise and connections to support every facet of the jewelry industry.
Take a look around to see all that JA offers — members can login to access member-only content like benefits, the Knowledge Vault and Advocacy resources.
Questions? Contact us at members@jewelers.org or call/text (800) 223-0673.
